
Racequip 5-Point Latch & Link Racing Harness - SFI 16.1
The RaceQuip 5-Point Latch & Link Racing Harness is an SFI 16.1-rated harness set built around RaceQuip's distinctive Duckbill latch mechanism — a pivoting hammer that locks the shoulder belts, lap belt, and sub-strap together over a center link with a single, deliberate motion. Twin individual shoulder belts and a pull-down lap belt design are manufactured from premium 3-inch polyester webbing with drop-forged steel hardware throughout. Double-adjustable ends support either wrap-around or bolt-in mounting to your roll cage or harness bar. A dependable, no-nonsense restraint system for racers who want proven latch-and-link security.
| Rating: | SFI 16.1 |
| Sub-Strap: | Single (1) |
| Lap Adjuster: | Pull Down |
| Belt Ends: | Loose (All) |
| Hardware: | Included (Bolt-in Tabs) |
| Part Number: | RQP-RES-71100 |
| Manufacturer: | 711001RQP |
- SFI 16.1 rated 5-point Latch & Link harness set, exceeds the standard's requirements; re-webbable and recertifiable upon expiration
- Duckbill latch mechanism — a pivoting hammer on the lap belt locks shoulder belts, lap belt, and sub-strap together over a center link in one motion
- Twin individual shoulder belts and pull-down lap belt design, manufactured from premium 3-inch polyester webbing
- Drop-forged steel hardware throughout; double-adjustable ends let you dial in fit from either side during installation
- Shoulder belts adjust 20" to 62"; lap belt adjusts 20" to 60"
- Included three-bar slide supports wrap-around or bolt-in mounting to a roll cage or harness bar (mounting bolts not included)
The RaceQuip 5-Point Latch & Link Racing Harness is built around RaceQuip's Duckbill latch system — a distinctive pivoting hammer mounted on the lap belt that locks every strap into place with a single, deliberate motion. Both shoulder belts and the sub-strap hook over a center link, the link seats into the latch on the lap belt, and the Duckbill swings down over it, securing the whole assembly into a detent. It's a mechanically simple system that's been a mainstay in entry-level and club racing for decades.
Built from premium 3-inch polyester webbing with drop-forged steel hardware throughout, this set carries an SFI 16.1 rating and exceeds the standard's requirements. Like all RaceQuip 711-series harnesses, it uses a pull-down lap belt design — you pull the lap belt ends down and away from the center buckle to tighten, rather than pulling up. Shoulder belts adjust from 20" to 62" and the lap belt from 20" to 60", and because the harness is double adjustable, you can dial in fit from either end during installation.
The included three-bar slide hardware supports wrap-around or bolt-in mounting to your roll cage or harness bar (mounting bolts not included; snap hook ends and eyebolts are sold separately if needed). SFI 16.1 belts can be re-webbed and recertified upon expiration, extending the service life of the hardware. This set is Black and sold as one harness per seat. Not D.O.T./FMVSS certified — for off-highway racing use only, and only when properly mounted to a roll cage or harness bar.
Choose options




