Racequip 6-Point Camlock Racing Harness - SFI 16.1
RaceQuip's 6-Point Camlock Harness Set delivers SFI 16.1-rated restraint with the convenience and speed of a single-point camlock release. Twin individual shoulder belts and a dual 2" crotch strap route through a lightweight aluminum alloy cam buckle with a wide engagement cone for fast, positive snap-in every time. Built from premium 3" polyester webbing with drop-forged steel hardware, it adjusts for wrap-around or bolt-in mounting to fit most roll cage and harness bar setups. A solid, no-nonsense upgrade for drivers moving up from a stock 3-point or basic 5-point belt.
| Rating: | SFI 16.1 |
| Sub-Strap: | Dual (2) |
| Lap Adjuster: | Pull Down |
| Belt Ends: | Loose (All) |
| Hardware: | Included (Bolt-in Tabs) |
| Part Number: | RQP-RES-74300-BLK |
| Manufacturer: | 743003RQP |
- SFI 16.1-rated 6-point racing harness for competition use
- Lightweight aluminum alloy camlock buckle with wide engagement cone for fast, positive snap-in
- Pull-down lap belt adjustment for quick, confident belt-downs
- Twin individual shoulder belts plus dual 2" crotch strap routing to a single mounting tab
- Premium 3" polyester webbing with drop-forged steel 3-bar slides and bolt-on hardware ends
- Double-adjustable ends support wrap-around or bolt-in mounting configurations
- Adjustable range: shoulders 25"–72", lap belt 30"–70"
- Not D.O.T./FMVSS 209/302 certified — for off-highway racing use only, mounts to roll cage or harness bar
When you're stepping up to a roll-caged race car, a proper 6-point harness isn't optional — it's the difference between staying planted under braking and sliding around when you need to be precise. RaceQuip's Camlock 6-Point Harness Set gives you SFI 16.1-certified restraint built around a lightweight aluminum alloy cam buckle, engineered for consistent spring pressure and a positive "click" every time you rotate the lever to unlatch (45 degrees left or right, driver's choice on orientation).
The lap belts use a pull-down adjustment — you cinch by pulling the belt ends away from the buckle, not by feeding excess back through, which makes for quicker, more confident belt-downs during driver changes or grid formation. Twin individual shoulder belts (rather than a single Y-strap) improve load distribution across your shoulders, and the dual 2" crotch strap design routes both ends into a single mounting tab at the buckle for a clean, low-profile installation.
Construction is straightforward and durable: premium 3" polyester webbing throughout, drop-forged steel 3-bar slides, and bolt-on hardware ends that double-adjust for either wrap-around or bolt-in mounting to your cage or harness bar. Shoulder belts adjust from 25" to 72" and the lap belt from 30" to 70", covering most seat and mounting-point combinations.
Note: this harness set is SFI 16.1-rated for competition use only — it is not D.O.T./FMVSS 209/302 certified and is not intended for on-highway use. Mount to a roll cage or dedicated harness bar in a race vehicle only.
Choose options