Planted Side Mount Seat Bracket - Nissan 300ZX (1990-1996) - Driver/Left

• Fits 1990-1996 Nissan 300ZX, driver/left side
• Designed for side-mount racing seats
• Low mounting point sets the seat as low and far back as possible
• 3/16" steel, hand-welded in the USA, black powder coat
• Sold individually. The passenger side is SB051LOWPA
• Not an FIA-homologated seat mount. Confirm acceptance with your sanctioning body before competition use

Disclaimers:

• Seats come in many different shapes and sizes, so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit before ordering the seat bracket and other components.
• Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size than the factory seat.
• Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor, but it is up to the end user to determine if a resistor will work and which resistor to use.
• Professional installation is recommended.

The 1990-1996 Nissan 300ZX has a loyal following among drivers who use their cars properly, and a real seat is part of almost every serious build. The factory seat tracks were never designed to carry a bucket, and fabricating a mount wastes time and rarely ends up square.

This Planted bracket is designed specifically for side-mount racing seats. It sets the mounting point low so the seat sits as low and as far back as the chassis allows, which is the fastest way to recover headroom with a helmet on. It's built from 3/16" steel, hand-welded and finished in black powder coat.

A set of side mounts is needed to complete the install. Planted's universal steel and aluminum side mounts are available separately in 90-degree and offset versions.

This is the driver/left bracket, sold individually. The passenger side is SB051LOWPA. Confirm your seat's dimensions against the cabin before ordering. Removing the factory seat can trigger airbag or occupancy warning lights, which may need a resistor. Professional installation is recommended.